IoT Virtual Lab (NIELIT Gorakhpur) - corresponding source of the starter firmware
Prepared 2026-11-13.

The lab sends ready-compiled firmware for its starter circuits to your browser so that they run
without signing in. This archive is the complete source that firmware is built from, so that you
can study, change and rebuild it, as the GNU GPL / LGPL licences of some libraries require.

Contents
  sketches/                 the 34 text starter sketches, exactly as shown in the lab's code panel
  libraries/                third-party Arduino libraries used by the starters, each with its own licence
                            (Keypad: GPL-3.0; Adafruit NeoPixel: LGPL-3.0; Servo: LGPL-2.1; Adafruit GFX,
                            SSD1306, Fingerprint: BSD; Adafruit Unified Sensor: Apache-2.0; Adafruit BusIO,
                            DHT: MIT; MFRC522: Unlicense; LiquidCrystal_I2C: MIT, written for IoT Virtual Lab)
  arduino-avr-core-1.8.8/   the Arduino AVR core, variant and the Wire, SoftwareSerial and SPI libraries (LGPL-2.1)
  esp32sim/, esp8266sim/    ESP32 / ESP8266 simulator mode: stand-in libraries written for IoT Virtual Lab and
                            copies of the Arduino core with small, marked changes (LGPL-2.1)
  licences/                 full licence texts

Starters built from blocks: their C++ is generated from the block program in the lab (press Code, then Text
to see it) and uses only the Arduino core.

How the firmware is built
  arduino-cli 1.5.1, platform arduino:avr 1.8.8 (avr-gcc 7.3.0), board arduino:avr:uno:
    arduino-cli compile -b arduino:avr:uno --libraries libraries sketches/<name>
  ESP32 / ESP8266 mode starters (esp32alone, esp01alone, nodemcuweather): the same board, with the core
  replaced by esp32sim/core or esp8266sim/core, the variant by esp32sim/variant or esp8266sim/variant, and
  the libraries in esp32sim/libraries or esp8266sim/libraries placed before the others.

Contact: Grievance Officer, NIELIT Gorakhpur - gorakhpur@nielit.gov.in
